- Home
- Brick Services
- Brick Cutting & Bonding
- Plinth Bricks
Resources
Downloads & Resources
Links
Downloads & Resources 
Links
Plinth Bricks
These special shaped bricks are used for aesthetic detail, allowing change in depth to brickwork normally at the base of buildings. They are typically used for window cills, corbelling details, capping and kerbs.
Expert advice is available from our team of brick cutting specialists who are on hand to discuss any specific project requirements or technical questions with you. Please call +44 (0)1283 200 157 or email support@igmss.co.uk
















PL.1 Plinth Stop Or Cant Stop (Left & Right Hand)
Type No. | A | B | C | D | E | F |
---|---|---|---|---|---|---|
PL.1.1* | 215 | 102 | 65 | 9 | 159 | 46 |
PL.1.2* | 215 | 102 | 65 | 23 | 173 | 60 |
*Requires mitring or refacing |
PL.2 Plinth Header
Type No. | A | B | C | D | E |
---|---|---|---|---|---|
PL.2.1* | 215 | 102 | 65 | 9 | 159 |
PL.2.2* | 215 | 102 | 65 | 23 | 173 |
*Requires mitring or refacing |
PL.3 Plinth Stretcher
Type No. | A | B | C | D | E |
---|---|---|---|---|---|
PL.3.1* | 215 | 102 | 65 | 9 | 46 |
PL.3.1* | 215 | 102 | 65 | 23 | 60 |
*Requires mitring or refacing |
PL.4 Plinth Internal Return - long (Left & Right Hand)
Type No. | A | B | C | D | E | F |
---|---|---|---|---|---|---|
PL.4.1* | 215 | 102 | 65 | 9 | 46 | 169 |
PL.4.2* | 215 | 102 | 65 | 23 | 60 | 155 |
*Requires mitring or refacing |
PL.5 Plinth Internal Return - short (Left & Right Hand)*
Type No. | A | B | C | D | E | F |
---|---|---|---|---|---|---|
PL.5.1* | 215 | 102 | 65 | 9 | 159 | 46 |
PL.5.2* | 215 | 102 | 65 | 23 | 173 | 60 |
*Requires mitring or refacing |
PL.6 Plinth Internal Angle (Left & Right Hand)
Type No. | A | B | C | D | E | F | α |
---|---|---|---|---|---|---|---|
PL.6.1* | 164 | 102 | 65 | 9 | 51 | 46 | 30° |
PL.6.2* | 164 | 102 | 65 | 23 | 51 | 60 | 30° |
PL.6.3* | 164 | 102 | 65 | 9 | 51 | 46 | 45° |
PL.6.4* | 164 | 102 | 65 | 23 | 51 | 60 | 45° |
PL.6.5* | 164 | 102 | 65 | 9 | 51 | 46 | 60° |
PL.6.6* | 164 | 102 | 65 | 23 | 51 | 60 | 60° |
PL.6.7* | 159 | 102 | 65 | 65 | 51 | 46 | 30° |
PL.6.8* | 159 | 102 | 65 | 23 | 102 | 60 | 30° |
PL.6.9* | 159 | 102 | 65 | 65 | 102 | 46 | 45° |
PL.6.10* | 159 | 102 | 65 | 23 | 102 | 60 | 45° |
PL.6.11* | 159 | 102 | 65 | 65 | 102 | 46 | 60° |
PL.6.12* | 159 | 102 | 65 | 23 | 102 | 60 | 60° |
PL.6.13* | 215 | 102 | 65 | 65 | 102 | 46 | 30° |
PL.6.14* | 215 | 102 | 65 | 23 | 102 | 60 | 30° |
PL.6.15* | 215 | 102 | 65 | 65 | 102 | 46 | 45° |
PL.6.16* | 215 | 102 | 65 | 23 | 102 | 60 | 45° |
PL.6.17* | 215 | 102 | 65 | 65 | 102 | 46 | 60° |
PL.6.18* | 215 | 102 | 65 | 23 | 102 | 60 | 60° |
*Requires mitring or refacing |
PL.7 Plinth External Return (Left & Right Hand)
Type No. | A | B | C | D | E | F |
---|---|---|---|---|---|---|
PL.7.1* | 215 | 102 | 65 | 9 | 159 | 46 |
PL.7.2* | 215 | 102 | 65 | 23 | 173 | 60 |
*Requires mitring or refacing |
PL.8 Plinth External Angle (Left & Right Hand)
Type No. | A | B | C | D | E | F | α |
---|---|---|---|---|---|---|---|
PL.8.1* | 159 | 102 | 65 | 9 | 102 | 46 | 30° |
PL.8.2* | 159 | 102 | 65 | 23 | 102 | 60 | 30° |
PL.8.3* | 159 | 102 | 65 | 9 | 102 | 46 | 45° |
PL.8.4* | 159 | 102 | 65 | 23 | 102 | 60 | 45° |
PL.8.5* | 159 | 102 | 65 | 9 | 102 | 46 | 60° |
PL.8.6* | 159 | 102 | 65 | 23 | 102 | 60 | 60° |
PL.8.7* | 215 | 102 | 65 | 9 | 102 | 46 | 30° |
PL.8.8* | 215 | 102 | 65 | 23 | 102 | 60 | 30° |
PL.8.9* | 215 | 102 | 65 | 9 | 102 | 46 | 45° |
PL.8.10* | 215 | 102 | 65 | 23 | 102 | 60 | 45° |
PL.8.11* | 215 | 102 | 65 | 9 | 102 | 46 | 60° |
PL.8.12* | 215 | 102 | 65 | 23 | 102 | 60 | 60° |
*Requires mitring or refacing |
PL.9 Plinth Squint (Left & Right Hand)
Type No. | A | B | C | D | E | F | α |
---|---|---|---|---|---|---|---|
PL.9.1* | 164 | 102 | 65 | 9 | 51 | 46 | 30° |
PL.9.2* | 164 | 102 | 65 | 23 | 51 | 60 | 30° |
PL.9.3* | 164 | 102 | 65 | 9 | 51 | 46 | 45° |
PL.9.4* | 164 | 102 | 65 | 23 | 51 | 60 | 45° |
PL.9.5* | 164 | 102 | 65 | 9 | 51 | 46 | 60° |
PL.9.6* | 164 | 102 | 65 | 23 | 51 | 60 | 60° |
*Requires mitring or refacing |
PL.9 Plinth Header Faced On End (Left & Right Hand)
Type No. | A | B | C | D | E |
---|---|---|---|---|---|
IG.PL.9.1* | 215 | 102 | 65 | 9 | 159 |
IG.PL.9.2* | 215 | 102 | 65 | 23 | 173 |
*Requires mitring or refacing |
IG.PL.10 Plinth Stretcher Faced On End (Left & Right Hand)
Type No. | A | B | C | D | E |
---|---|---|---|---|---|
IG.PL.10.1* | 215 | 102 | 65 | 9 | 46 |
IG.PL.10.2* | 215 | 102 | 65 | 23 | 60 |
*Requires mitring or refacing |
IG.PL.11 Plinth / Cant Mitre Stretcher (Left & Right Hand)
Type No. | A | B | C | D | E | F |
---|---|---|---|---|---|---|
IG.PL.11.1* | 215 | 102 | 65 | 9 | 46 | 56 |
IG.PL.11.2* | 215 | 102 | 65 | 23 | 60 | 42 |
*Requires mitring or refacing |
IG.PL.12 Plinth / Cant Mitre Header (Left and Right Hand)
Type No. | A | B | C | D | E | F |
---|---|---|---|---|---|---|
IG.PL.12.1* | 215 | 102 | 65 | 9 | 159 | 56 |
IG.PL.12.2* | 215 | 102 | 65 | 23 | 1732 | 42 |
*Requires mitring or refacing |
IG.PL.13 Plinth Internal Return (Left & Right Hand)
Type No. | A | B | C | D | E |
---|---|---|---|---|---|
IG.PL.13.1* | 169 | 56 | 65 | 9 | 46 |
*Requires mitring or refacing |
IG.PL.14 Wide Bed Plinth External Return (Left & Right Hand)
Type No. | A | B | C | D | E |
---|---|---|---|---|---|
IG.PL.14.1* | 271 | 158 | 65 | 9 | 102 |
*Requires mitring or refacing |
IG.PL.15 Wide Bed Plinth Stretcher
Type No. | A | B | C | D | E |
---|---|---|---|---|---|
IG.PL.15.1* | 215 | 158 | 65 | 9 | 102 |
*Requires mitring or refacing |
Discuss Your Project
Contact our technical design team to collaborate or enquire about a project.
Contact UsRelated Products
Request CPD Presentation
Gain your CPD points by requesting a Continuous Professional Development presentation on IG Masonry Support solutions.
Request CPD